Getting started

Up and running in one afternoon.

No wire to bury, no professional to book. Five steps, and the robot knows your garden.

1. Unbox and charge

   Take out the robot, the charging station and the RTK reference antenna. Plug in the station and let the robot charge fully before the first run.

2. Position the station and antenna

   Place the station on a flat surface near a power outlet. The RTK antenna needs a clear view of the sky — that's what delivers centimetre accuracy. Avoid spots under dense cover or hard against a tall wall.

   Careful antenna placement is the number-one factor in reliable navigation.

3. Install the app and pair

   Download the Yuno app, create your account, and pair the robot following the on-screen steps. It connects in a few minutes.

4. Map your garden

   Guide the robot once around your zones from the app to trace their outlines. Add no-go areas (flower beds, pool, vegetable patch) and the transit corridors between zones. The map is saved permanently.

5. Start the first mow

   Set your schedule and launch the first cycle. The robot mows, then returns to its station on its own. The first passes refine coverage; mowing then runs fully autonomously.

Stuck during setup? Write to support@yuno-official.com — we reply within 24 business hours. See also the FAQ.